Advance Cure Evolution – Interview with Will McFadden

Waterborne paints have been a hot topic in the automotive refinish industry for a long time. Of course, the actual development of the paints, as well as the equipment necessary to use them, has gone on for far longer than most would realize.

It may surprise you to learn that the very first accelerated drying system engineered to speed up the drying of waterborne paints was developed way back in the mid 1990s by a company whose name most of you would probably recognize: DeVilbiss Spray Booths. This system was dubbedAdvanceCure’, and you’d likely not even recognize the first generation models when compared to the latest designs.

As we covered back in one of our very first posts on this blog, we’re quite proud that DeVilbiss Spray Booths is part of the GFS heritage family of companies. And we’re just as proud of how far our engineering team has evolved the AdvanceCure system to create even greater versatility for retrofits in to all types of paint booths, as well as to continue to reduce the drying times of all types of automotive coatings in order to achieve the highest levels of production for your shop.

AdvanceCure Horizontal Tower
AdvanceCure Horizontal Module (Current generation design)

Recently GFS Marketing Coordinator Ronnie Guindon asked a series of questions to GFS Engineer and lead designer of the AdvanceCure system, Will McFadden. They talked about just how much AdvanceCure has changed since those very early days, and what it means for body shops looking forward to the future. Here is their discussion:

Ronnie Guindon (RG): How long have you been the lead developer of the AdvanceCure System? 

Will McFadden (WF): I started working on the AdvanceCure systems in 2004. The first project I had was to increase the performance of the original sidewall system. I was the lead developer on the project that launched the two corner modules into the market in the first quarter of 2007. 

RG: When was AdvanceCure first introduced on the market?

Advance Cure Evolution – Interview with Will McFaddenWM: It was originally introduced back in 1997/98. Back then, waterborne coatings were not nearly as advanced as they are today. Even with systems like AdvanceCure, they still took much longer to dry than their solvent based counterparts. Once the coating technology advanced in the early 2000’s, and government regulations began to be implemented in North America, there became a much greater necessity in the market for this kind of equipment. 

RG: What are the Core Benefits of the AdvanceCure System? 

WM: AdvanceCure dramatically speeds up the evaporation of the solvent, or water, in the paint and reduces the curing time of the paint. It does this by directing air at an opposing angle to the standard airflow in the paint booth, in order to create a turbulent, convection-type environment during the flash and cure cycles.

This turbulent airflow increases the speed of the temperature rise of the painted panels, and the speed at which water is drawn out of the coating. These effects greatly reduce the time needed to complete each paint job, which in turn reduces the energy and fuel consumption, thereby increasing the efficiency of the paint booth.

Video smoke test illustrating the effects of the AdvanceCure system airflow in a downdraft paint booth:

RG: What applications are suitable for use with the AdvanceCure System?

GFS Paint Booth with AdvanceCure
Horizontal AdvanceCure modules installed in a GFS Performer Downdraft Paint Booth

WM: All AdvanceCure systems are engineered to provide the fastest drying times with water-based paints. However, what most people don’t realize is that accelerated airflow systems also provide faster curing with solvent-based paints, too. The reason for the reduced curing times with solvent-based paints is the increased heat-transfer efficiency of the turbulent air, whereas waterborne paints benefit from both the increased air circulation as well as the improved heat transfer. The newer systems with higher air velocity perform better with faster drying times using all types of paints than the older systems developed 5 or more years ago.

Other major benefits with the GFS-engineered systems are the adjustable nozzles and ability to install the different types of AdvanceCure modules in virtually any kind of paint booth to provide flexibility to completely cover almost any vehicle as well as car components on stands in the booth. 

RG: What improvements are seen in drying and curing times using this system. 

WM: AdvanceCure systems reduce the drying times by an overall average of 30 to 40 percent.  This time reduction increases the throughput of the booth eliminating wasted time and improving shop efficiency. However, we’ve seen some instances during testing where reductions of up to 80% are possible, depending on the climate and humidity and this also greatly depends on which specific coating you are using. There are a lot of factors that come in to play, so be aware that your real-world results will likely differ from those seen in other shops in various locations across North America.

RG:  Can you give us a timeline of the evolution of the AdvanceCure system? 

WM:

1998 – Original nine nozzle, sidewall, AdvanceCure systems with air speeds at the vehicle of 100 – 150 fpm.

2004 – Increased the motor and blower size of the sidewall AdvanceCure System which pushed the air speed at the vehicle to 200 – 250 fpm.

GFS AdvanceCure Tower
AdvanceCure Tower, Circa 2004

2007 – Introduced the six nozzle, corner-mounted AdvanceCure systems with air speeds at the vehicle of approximately 300fpm. The corner modules quickly became the most popular AdvanceCure system due to their ability to be easily retrofit in to virtually any spray booth.

Advance Cure Evolution – Interview with Will McFadden
AdvanceCure Corner Modules – Circa 2007 installed in ECO Concept Downdraft paint booth

2010 – Offset modules are sold with air velocities at the vehicle of approximately 500fpm. The horizontal sidewall system becomes the best selling design due to its increased flexibility in installation and higher airflow capabilities.

GFS AdvanceCure
AdvanceCure Horizontal Modules – Circa 2011 installed in ECO Ultra SpaceSaver Downdraft paint booth

2012 – Integrated AdvanceCure systems with the motor and blower on the roof and the ducting built into the booth plenum are available. The nozzle plenums are located just below the filter ceiling and provide air velocities of 500fpm at the vehicle.

More Information:

2 thoughts on “Advance Cure Evolution – Interview with Will McFadden

  1. Very Good Blog Will. This information you all post is very interesting ti myself as well as my customers. What are your feelings on performance of the wall mounted horizontal blowers verses the corner mounted?

  2. Hi Wayne, Thanks for the compliments!

    We passed your question along to Will, and here's his response:

    “The horizontal side wall towers have a performance advantage over the corner towers because they are closer to more of the vehicle. As a result the side wall towers provide faster moving air and more even air speeds across the vehicle.”

    Hope this helps! Let us know if you have any other questions. Thanks!

Leave a Reply